English
Malay
W316ST
Short throw projection
The 0.5:1 throw ratio lens on the W316ST Short-Throw DLP Multimedia Projector from Optoma makes it ideal for classrooms, small conference rooms, rear projection, and other tight spaces where the projector needs to be placed relatively close to the screen. It features the WXGA (1280 x 800) format, which - at a 16:10 aspect ratio - easily adapts to the 16:9 format of HDTV, and can also "pillarbox" to show 4:3 material undistorted. With a brightness of 3600 lumens, combined with the short throw distance required, the W316ST provides sufficient output to overcome a reasonable amount of ambient light for use in rooms where the lighting cannot be fully controlled.
Just about every input possibility is covered on the W316ST. This includes an HDMI input with 3D support, two VGA inputs and one output, plus composite and S-video inputs for legacy SD equipment. There are two separate audio inputs to accompany the analog video inputs, and there is a VAO audio output that loops through the audio accompanying whichever input is selected. In case a separate sound system is unavailable, there is also a built-in 10W speaker.
An IR remote is included, featuring a laser pointer and mouse control for giving presentations. It also has RS-232 for integration with control systems such as Crestron, plus an Ethernet port for control over a local network, helping reduce IT administrative costs.
- Short 0.52:1 Throw Ratio
- Throw ratio is one of the most important specifications a projector lens has as it tells you the image size (width) you will get at a given distance from the screen. For example, at a 42" distance, this projector will throw an 81"-wide (96"-diagonal) image
- Single-Chip DLP Technology
- Uses a combination of a 0.65" chip covered in millions of micro-mirrors, and a color wheel, to produce an image. DLP features less spacing between pixels and better contrast than many comparable LCD-based systems
- 3600 Lumen Lamp
- A single lamp provides 3600 lumens brightness in Normal mode, and is estimated to last 4000 hours (up to 7000 hours if continuously used in the lower brightness ECO+ mode). To determine the ideal brightness level for your application, you will need to take into account the screen width, distance from the projector to the screen (throw distance), amount of ambient light near the screen, and the reflectivity (gain) of the screen surface used
- 16:10 Native Aspect Ratio
- This projector features a 16:10 native aspect ratio. This is considered a widescreen format, and comes very close to the 16:9 standard of HDTV. This format is ideal if you plan to show HD video, and can still be used for presentations - though in the case of PowerPoints, some extra space may be leftover on the sides. The projector can show 4:3 too; however, black bars (pillaring) will have to be applied, or the image will have to be stretched or cropped to fit
- HDMI 1.4a Mandatory 3D Compliance
- This means you can watch 3D video from most HDMI 1.4a 3D sources, including Blu-ray Discs, many computer graphics cards, and select game consoles. Active 3D glasses - such as ZD302 - available separately
- Powered VGA Port
- A powered VGA port enables the projector to be used with the BI-EXTBG03 wireless VGA dongle, which is available separately
- Remote Mouse Control
- When connected to a computer via the mini-USB type-B female port (cable available separately) it is possible to use the projector's remote to provide mouse navigation functionality. On top of that, the remote features a built-in laser pointer - effectively turning the remote into a presentation mouse
Specification
| Display Technology | Single 0.65” WXGA DC3 DMD DLP® Technology by Texas Instruments™ |
| Native Resolution | WXGA 1280 x 800 |
| Brightness | 3600 lumens |
| Contrast Ratio | 20,000:1 (full on/full of) |
| Noise Level (Eco mode) | 29dB |
| Weight | 6.1 lbs (2.77 kg) |
| I/O Connectors | HDMI, two VGA-in, VGA-out, S-video, composite video, audio-in/mic, audio-in, audio-out, RS-232C, RJ45 and USB mini-B |
| Maximum Resolution | WUXGA (1920 x 1200) |
| Computer Compatibility | WUXGA, HD, UXGA, SXGA+, WXGA+, WXGA, SXGA, XGA, SVGA, VGA |
| Video Compatibility | NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), HDTV (720p, 1080i/p) |
| Displayable Colors | 1.07 Billion |
| Projection Lens | F=2.8, f=7.419 mm, manual focus |
| Throw Ratio 3 | 0.52 (distance/width) |
| Projection Distance | 1.6' - 11.1' (0.5-3.4 m) |
| Aspect Ratio | 16:10 Native, 16:9 and 4:3 Compatible |
| Offset | 112% |
| Horizontal Scan Rate | 15.375 - 91.1KHz |
| Vertical Scan Rate | 24 - 85Hz, 120Hz |
| Lamp Type | 210W |
| Lamp Life2 Eco+/Dynamic/Eco/Bright | 7000/6500/6000/4000 (hrs) |
| Keystone Correction | ± 40° Vertical |
| Audio | 10-Watt speaker |
| Dimensions (W x H x D) | 12.4" x 4.0" x 8.8" (314 x 101 x 224 mm) |
| Remote Control | IR remote mouse control with laser |
| Power Supply | AC input 100-240V, 50-60Hz, auto-switching |
| Power Consumption | Max 280W (Normal), Min 194W (Eco+), <0.5W (standby-ECO) |
| Operating Conditions | 41-104°F (5-40°C), 85% max humidity |
| Uniformity | >80% |
| Security | Kensington® lock port, security bar & keypad lock |
| Standard Accessories | AC power cord, remote control, batteries for remote, lens cap, multilingual CD-ROM user's manual, quick start card and warranty card |
| Optional Accessories | Universal ceiling mounts, wall mount, wireless HDMI system, Cat6 HDBaseT, Optoma screen, VGA dongle, DLP® Link™ 3D glasses and carrying case |
| RoHS | Compliant |
| 3D Compatibility | Supports all HDMI 1.4a mandatory 3D formats (Frame pack, side-by-side, top-bottom) and up converts frame rate from 60Hz to 120Hz or 24Hz to 144Hz (i.e 60 or 72 frames per eye). 3D glasses are needed and are sold separately. Refer to user manual for details. |
| Speaker (Watts) | 10-Watt speaker |
| On Screen Display | Complete on-screen menu, adjustments in 27 languages |
| Optional Wireless | Yes |
| Warranty | 3-Year Optoma Express Service, 1-Year on Lamp |
| Projection method | Front, rear, ceiling mount, table top |
